What Is the Difference Between Telecommunications and Network Cabling?
“Telecommunications cabling” and “network cabling” are often used as if they mean the same thing, and on many quotes and project plans they appear side by side. They’re closely related, but they aren’t identical, and knowing the difference helps you plan projects, compare quotes and hire the right contractor. At Los Angeles Telecom Techs, we install both for businesses across Los Angeles, and this guide explains what each term means, where they overlap and why the distinction matters for your building.
The Short Answer
Network cabling is the cabling that connects computers and devices to your data network. Telecommunications cabling is the broader category: it includes network cabling, plus the fiber backbone, voice, security, audio visual and building systems cabling, and the telecom rooms and pathways that hold it all together.
Think of it this way: all network cabling is telecommunications cabling, but not all telecommunications cabling is network cabling.
What Is Network Cabling?
Network cabling refers to the cables that carry data between devices and the network equipment that connects them. In most businesses, that means Ethernet over twisted-pair copper cable running from each workstation, printer or device back to a switch in a telecom room.
What network cabling typically includes
- Cat6 and Cat6A cable runs to desks, offices and conference rooms
- Jacks and wall plates at each outlet
- Patch panels and patch cords in the telecom room
- Connections to switches, routers and servers
- Testing and labeling of each data link
Network cabling is focused on one job: moving data reliably and at the right speed. Its performance is measured in bandwidth and distance, and it’s certified against category standards like Cat6 at 250 MHz or Cat6A at 500 MHz.
What Is Telecommunications Cabling?
Telecommunications cabling covers every cable and pathway that carries communications through a building. The industry standards themselves, such as ANSI/TIA-568, use “telecommunications cabling” to describe the complete system: data, voice, video and building services, along with the spaces and infrastructure that support them.
What telecommunications cabling typically includes
- All network cabling to desks and devices
- Fiber optic backbone between floors and buildings
- The entrance facility where carrier circuits arrive
- MDF and IDF telecom rooms with racks, enclosures and grounding
- Voice cabling for VoIP phones, paging and intercoms
- Security cabling for cameras and access control
- Audio visual cabling for displays, speakers and conference rooms
- Pathways such as cable tray, J-hooks, sleeves and firestopping
In short, telecommunications cabling is the whole communications nervous system of a building, while network cabling is one important part of it.
Side-by-Side Comparison
| Factor | Network cabling | Telecommunications cabling |
|---|---|---|
| Scope | Data connections between devices and switches | All communications infrastructure in a building |
| Signals carried | Mostly Ethernet data | Data, voice, video, security, audio and control |
| Typical media | Cat6 and Cat6A copper | Copper, fiber, coax, speaker and low-voltage cable |
| Systems supported | Computers, printers, switches, servers | Networks plus phones, paging, cameras, access control, AV |
| Infrastructure included | Drops, jacks, patch panels | Entrance facilities, backbone, telecom rooms, pathways, grounding |
| Governing standards | Mainly TIA-568 for copper | TIA-568, 569, 606 and 607 together |
Key Differences Explained
1. Scope
Network cabling covers the connection between a device and the network. Telecommunications cabling covers everything from the point where your internet provider enters the building to every phone, camera, access point, speaker and screen inside it.
2. Types of systems
Network cabling serves your data network. Telecommunications cabling serves many systems at once: data, phones, overhead paging, intercoms, security cameras, card readers, Wi-Fi and conference room AV. Each of those systems has its own requirements, and many are separate services in their own right.
3. Cable types
Network cabling is mostly Cat6 and Cat6A copper. Telecommunications cabling also includes single-mode and multimode fiber, outdoor and armored cable, speaker wire, shielded microphone cable, composite access control cable and other specialty low-voltage cable.
4. Infrastructure beyond the cable
Telecommunications cabling includes the infrastructure that holds the system together: telecom rooms, seismically braced racks, cable tray, grounding and bonding, and firestopped penetrations. Network cabling projects may touch these, but they aren’t the focus.
5. Planning and standards
Network cabling is mainly governed by the TIA-568 standard for copper performance. Telecommunications cabling draws on the full family of standards: TIA-568 for cabling, TIA-569 for pathways and spaces, TIA-606 for labeling and TIA-607 for grounding and bonding.
Where the Two Overlap
The line between the two has blurred over time because so many systems now run on Ethernet. VoIP phones, IP security cameras, Wi-Fi access points, video conferencing systems and even some door readers connect over the same Cat6 and Cat6A cable used for computers, often powered by Power over Ethernet.
That means a single network cabling drop might support a phone today and a camera tomorrow. It’s also why modern projects are planned as one telecommunications cabling system, with network cabling at its core, rather than as separate wiring jobs for each system.
Because these systems share so much infrastructure, it helps to know which ones your business actually needs before planning the cabling. Our guide to the What Telecommunications Services Are Available for Businesses in Los Angeles? walks through each one, from network and fiber cabling to Wi-Fi, voice, security and AV.
Why the Distinction Matters
The difference may sound like terminology, but it affects real decisions:
- Comparing quotes. A “network cabling” quote may cover only data drops, while a “telecommunications cabling” quote may include fiber, telecom rooms, security and AV. Make sure you’re comparing the same scope.
- Hiring the right contractor. A contractor who only pulls data cable may not handle fiber, access control or seismic rack bracing.
- Avoiding gaps. If each system is scoped separately, pieces like grounding, labeling or the telecom room layout can fall between vendors.
- Planning for the future. Designing the whole telecommunications system at once leaves room for growth in every system, not just the network.
Real-World Examples in Los Angeles
A Century City office floor
The network cabling covers Cat6A to every workstation and access point. The full telecommunications cabling scope adds riser fiber to the building MDF, a new IDF with braced racks, VoIP phone drops, card readers at suite entries and conference room AV cabling.
A warehouse near the Port of Los Angeles
Network cabling connects shipping stations and label printers. Telecommunications cabling adds fiber to remote IDFs, high-bay Wi-Fi access points, overhead paging horns and security cameras on docks and fences.
A Westwood medical office
Network cabling serves exam room workstations and printers. Telecommunications cabling adds phones at every station, access control on medication rooms, cameras at entrances and guest Wi-Fi in the waiting room.
A Fairfax District retail store
Network cabling connects point-of-sale terminals and back-office computers. Telecommunications cabling adds security cameras over registers, digital signage cabling and guest Wi-Fi on the sales floor.
How Each Is Installed and Tested
The installation process is similar at the device level, but telecommunications cabling projects include more steps and more kinds of testing.
Network cabling installation
Installers pull Cat6 or Cat6A from each outlet to the nearest telecom room, keeping each run within the 90-meter permanent link limit. Runs are terminated on jacks and patch panels, then certified with a cable analyzer for wire map, length, insertion loss, crosstalk and return loss.
Telecommunications cabling installation
A full telecommunications project starts earlier and covers more ground. Pathways and telecom rooms are built first, with racks anchored and braced, ladder rack installed and grounding bonded. Fiber backbone is pulled between rooms, spliced and terminated. Then horizontal cabling goes in for every system, including data, voice, Wi-Fi, cameras, access control and AV.
Testing expands too. Copper links are certified, fiber strands are loss-tested and traced with an OTDR, paging and intercoms are tested live, cameras are checked for image and recording, and access-controlled doors are tested for locking and release. Everything is labeled to TIA-606 and recorded on as-built drawings.
Common Misconceptions
- “Network cabling is the same as internet service.” Your internet provider delivers a circuit to the building. Network cabling carries that connection to your devices inside.
- “Telecommunications just means phones.” Phones are only one part. Telecommunications cabling covers data, voice, video, security and more.
- “Wi-Fi means we don’t need cabling.” Every access point needs a wired connection, and newer ones need Cat6A to reach full speed.
- “Any cable will do.” Cable category, jacket rating, installation quality and testing all affect performance and code compliance.
Questions to Ask Before You Get a Quote
- Does the quote cover only data drops, or the full telecommunications scope?
- Are fiber backbone, telecom room work and grounding included?
- Which systems are covered: phones, Wi-Fi, cameras, access control, AV?
- What cable categories and jacket ratings will be used?
- Will every link be certified, labeled and documented?
- Is the contractor licensed for low-voltage work in California?
Frequently Asked Questions
Is network cabling part of telecommunications cabling?
Yes. Network cabling is one part of telecommunications cabling. Telecommunications cabling includes network cabling plus fiber backbone, voice, security, AV and the telecom rooms and pathways that support them.
Is Ethernet cabling the same as network cabling?
In everyday use, yes. Ethernet is the standard most business networks use, and the Cat6 and Cat6A cable that carries it is what people usually mean by network cabling.
Do VoIP phones use network cabling or telecommunications cabling?
Both terms apply. VoIP phones connect over the same Cat6 network cabling as computers, which is part of the larger telecommunications cabling system.
Does Wi-Fi need cabling?
Yes. Every Wi-Fi access point connects to the network through a cable, usually Cat6A, which also delivers its power through PoE.
Should I hire separate contractors for network and telecommunications cabling?
Usually not. A commercial telecommunications contractor can handle network cabling along with fiber, voice, security and AV cabling, which keeps standards and documentation consistent.
Final Thoughts
Network cabling and telecommunications cabling are closely connected, but they aren’t the same. Network cabling carries your data. Telecommunications cabling is the complete system that carries data, voice, video, security and building communications, along with the telecom rooms and pathways that support them. Understanding the difference helps you scope projects accurately, compare quotes fairly and plan infrastructure that grows with your business.
The next step is knowing what actually goes into the walls and ceilings. Our guide to the types of cables telecommunications contractors install explains each cable, from Cat6 and Cat6A to fiber and specialty low-voltage cable, and where each one is used.
Planning a cabling project in Los Angeles? Call (562) 245-4723 for a site walk and itemized quote.
Request a quote