Structured Cabling Los Angeles CA | Installation, TI, Relocations & MDF/IDF

Structured Cabling Services for Los Angeles Offices & Commercial Buildings

Six structured cabling services under one crew: structured cabling installation, commercial building systems, new office cabling, tenant improvement cabling, office relocations and MDF/IDF build-outs. Each is designed, installed, certified and documented to TIA standards.

Building out, moving or reorganizing your telecom rooms? Call (562) 245-4723 for a site walk and itemized quote.

Request a quote

Structured Cabling Services

Structured cabling organizes every cable in your building into a standard, documented system that’s easy to manage, expand and troubleshoot. Choose the service that matches where you are: a new space, a buildout, a move, or telecom rooms that need to be rebuilt.

Structured Cabling Installation

Horizontal • Backbone • Telecom Rooms

End-to-end design and installation of horizontal, backbone and telecom room cabling to ANSI/TIA standards, for a single floor or a full building.

  • Cat6 and Cat6A horizontal cabling
  • Fiber and copper backbone
  • Patch panels, racks and managers
  • Certified and labeled links

Commercial Structured Cabling

Multi-Floor • Multi-Tenant • Risers

Building-wide systems for multi-floor and multi-tenant properties, from carrier entrance and riser backbone to an IDF on every floor.

  • Entrance facilities and demarc extensions
  • Riser backbone to every floor
  • Shared pathways for tenants
  • TIA-606 building records

New Office Cabling

New Construction • New Suites • GC Coordination

Complete low-voltage scope for new suites and ground-up buildings, coordinated with your general contractor so pathways go in before ceilings close.

  • Drop layout from floor plans
  • Pathways set during construction
  • IDF build-out and backbone
  • Ready before move-in

Tenant Improvement Cabling

TI Buildouts • Demo • Re-Use

Cabling scope for TI buildouts: abandoned cable removed, good runs tested and kept, and new drops installed to match the revised floor plan.

  • Abandoned cable removal
  • Testing and reuse of existing runs
  • New drops for the new layout
  • IDF updates and re-labeling

Office Relocation Cabling

Pre-Move • Move Day • Decommission

Cabling installed and tested at the new space before move day, on-site support during the move, and the old space decommissioned afterward.

  • New space wired and certified in advance
  • Move-day connection support
  • Equipment and rack relocation
  • Old space cleared and returned

MDF / IDF Build-Out

Racks • Seismic Bracing • Grounding

Main and intermediate telecom rooms built out with anchored, braced racks, ladder rack, managers, fiber enclosures and a bonded grounding system.

  • Two- and four-post racks, seismically braced
  • Ladder rack and cable managers
  • Patch panels and fiber enclosures
  • TIA-607 grounding and bonding

Structured Cabling Infrastructure We Install in Los Angeles

  • Horizontal Cat6 & Cat6A
  • Fiber Backbone
  • Copper Backbone
  • Entrance Facilities
  • Demarc Extensions
  • Equipment Rooms (MDF)
  • Telecom Rooms (IDF)
  • Two- & Four-Post Racks
  • Seismic Bracing
  • Ladder Rack
  • Patch Panels
  • Fiber Enclosures
  • Cable Managers
  • Grounding Busbars
  • Sleeves & Firestopping
  • TIA-606 Labeling

Every structured cabling service we offer builds on the same foundation: horizontal Cat6 and Cat6A to each outlet, fiber and copper backbone between telecom rooms, and organized racks with patch panels, fiber enclosures and cable managers. What changes is the scope, from one suite to an entire building.

In Los Angeles, telecom rooms also need seismic consideration, so we anchor and brace racks, run ladder rack overhead, and bond every rack to a grounding busbar. Wall and floor penetrations are sleeved and firestopped, and every component is labeled to TIA-606 so the system stays manageable as your business changes.

ServiceBest forWhat’s included
Structured Cabling InstallationAny floor or building that needs a complete systemHorizontal, backbone, telecom rooms, testing and labeling
Commercial Structured CablingMulti-floor and multi-tenant buildingsEntrance facilities, riser backbone, IDF per floor, building records
New Office CablingNew suites and ground-up constructionDrop layout, pathways during construction, IDF and backbone
Tenant Improvement CablingTI buildouts in existing spacesAbandoned cable removal, reuse testing, new drops, IDF updates
Office Relocation CablingBusinesses moving to a new spacePre-move install, move-day support, decommissioning
MDF / IDF Build-OutNew, overcrowded or outdated telecom roomsRacks, bracing, ladder rack, panels, enclosures, grounding
42U network rack in a West LA office IDF with 48-port Cat6A patch panels, horizontal wire managers and an OM4 fiber enclosure
IDF buildout: 42U rack on 19-inch EIA-310 rails, 48-port Cat6A patch panels with 1U horizontal managers, and an LC fiber enclosure fed by OM4 riser backbone.

Structured Cabling for Commercial Facilities in LA

  • Offices
  • Warehouses
  • Schools
  • Medical Facilities
  • Retail
  • Industrial Facilities
  • Commercial Buildings

We install structured cabling in occupied buildings and new construction alike, and we take on a single IDF as readily as a full tower. Noisy work is scheduled after hours so your business keeps operating. Typical structured cabling jobs around the city include:

Century City tenant improvements

Full-floor TI buildouts with abandoned cable removed, a rebuilt IDF and new Cat6A to every workstation.

Downtown LA office relocations

The new floor wired and certified weeks ahead, with crews on site over move weekend and the old space cleared after.

Hollywood new office buildouts

New creative offices where pathways and telecom rooms are coordinated with the general contractor from day one.

Westchester IDF rebuilds

Overcrowded telecom rooms re-racked, braced, grounded and re-dressed without taking the office offline.

Structured Cabling Problems We Solve for IT Managers in Los Angeles

Spaghetti in the telecom room

Tangled patch cords and no cable management make every change risky. We rebuild racks and re-dress every cable.

Move-in dates at risk

We coordinate with contractors and movers so the new space is certified and ready before your team arrives.

Ceilings full of dead cable

Years of abandoned runs crowd pathways. We remove what’s unused and keep only links that test good.

No documentation

We label every room, rack, panel and port to TIA-606 and deliver as-built drawings and test reports.

Our Structured Cabling Process for Our Los Angeles Customers

  1. Site walk and plan review

    We walk the space and telecom rooms with your floor plans and identify which structured cabling services you need.

  2. Design and itemized quote

    You receive one scope covering every service involved, with drop counts, room layouts, backbone and a schedule.

  3. Pathways and telecom rooms

    Installers set sleeves, firestopping, ladder rack, racks, bracing and grounding.

  4. Cabling installation

    Backbone and horizontal cabling are pulled, dressed and terminated on patch panels and fiber enclosures.

  5. Testing and certification

    Every copper link is certified and every fiber strand is tested before close-out.

  6. Labeling and handoff

    Everything is labeled to TIA-606, and you receive as-built drawings and certification reports.

Structured Cabling Testing & Certification

Every structured cabling service ends the same way: with proof. We certify each Cat6 and Cat6A link to its category, loss-test and OTDR-trace every backbone fiber strand, and verify grounding in each telecom room before we hand the system over.

Reports are delivered as PDF files tied to your patch panel labels, which makes manufacturer warranty registration and future troubleshooting simple.

Technician certifying a Cat6A permanent link at a patch panel and fusion splicing OS2 single-mode fiber in a rack-mount enclosure
Cat6A permanent links are certified to 500 MHz over a maximum of 90 m. Fiber splices are verified on OTDR against the TIA-568.3-D limit of 0.3 dB per splice.

Structured Cabling Service Area in Southern California

Our office on West Olympic Boulevard puts our crews minutes from the Westside and a short drive to Hollywood, Downtown LA and the South Bay. We install structured cabling throughout the city and these nearby cities:

Request a Structured Cabling Quote

Send us the address, approximate square footage and which service you need: a new installation, a TI, a move or telecom room work. Floor plans help. We’ll schedule a site walk and follow up with an itemized scope.

We hold a California C-7 state license issued by the Contractors State License Board in Sacramento (CSLB #[NUMBER]).

Los Angeles Telecom Techs
11340 W Olympic Blvd, Los Angeles, CA 90064
Tel: (562) 245-4723
Email: [email protected]

Get a structured cabling system that’s organized, certified and documented.

Request a quote
Scroll to Top