Security Camera Installation Los Angeles CA | Commercial IP Camera Systems

Security Camera Installation in Los Angeles, CA for Commercial Properties

Commercial IP security camera installation, from the first coverage plan to the final view check. We choose the right camera for every location, mount and aim it for a clear image day and night, and connect it to your recorder so every entrance, register, dock and lot is covered.

Need new cameras or better coverage? Call (562) 245-4723 for a site walk and itemized quote.

Request a quote

Security Camera Installation Services

A camera is only useful if it’s pointed at the right place and captures a usable image. Our technicians plan coverage, mount and aim every camera themselves, and install it on certified cabling, so footage is clear when you actually need it.

Coverage Planning & Camera Layout

Site Survey • Field of View • Camera Schedule

A camera layout that covers entrances, exits, registers, docks and parking areas, with the right camera type and lens for each view.

Indoor Camera Installation

Domes • Turrets • Fisheye

Dome, turret and 360-degree cameras mounted in lobbies, hallways, offices, stockrooms and over registers.

Outdoor & Perimeter Camera Installation

Bullets • Weatherproof • Night Vision

Weather-rated cameras mounted on walls, eaves and corners to cover building exteriors, entrances and perimeters day and night.

PTZ & Multi-Sensor Camera Installation

PTZ • Multi-Sensor • Pole Mounts

Pan-tilt-zoom and multi-sensor cameras on poles, parapets and corners for parking lots, yards and large open areas.

NVR & Video Management Connection

NVR • VMS • Remote Viewing

Cameras connected to your NVR or video management system and checked for recording, working with your security provider where needed.

Camera Replacement & Upgrades

Analog to IP • Higher Resolution • Re-Aiming

Old analog or low-resolution cameras replaced with modern IP cameras, and existing cameras re-aimed to close coverage gaps.

Security Cameras & Mounts We Install in Los Angeles

  • Dome Cameras
  • Turret Cameras
  • Bullet Cameras
  • PTZ Cameras
  • Multi-Sensor Cameras
  • 360° Fisheye Cameras
  • Ceiling Mounts
  • Wall Mounts
  • Corner Mounts
  • Pole Mounts
  • Pendant Mounts
  • Weatherproof Junction Boxes
  • Vandal-Resistant Housings
  • NVR Connections
  • VMS Connections
  • Camera Labels

Good coverage starts with matching the camera to the job. Narrow views at doors and registers need enough detail to identify a face; wide views over lots and sales floors need to show what happened and where. We pick the camera type, lens and resolution for each view, and place cameras so they back each other up without leaving gaps.

Lighting matters as much as the camera. Bright LA sun, deep shadows and night conditions all affect the image, so we use cameras with wide dynamic range and infrared where needed, and aim them away from direct glare. Because California law restricts recording private conversations, cameras with microphones are typically installed with audio disabled unless you’ve confirmed it’s permitted.

Camera typeBest locationStrengthTypical mounting
DomeLobbies, hallways, registersDiscreet and vandal-resistantCeiling or wall
TurretEntrances and interior corridorsStrong night vision without dome glareCeiling or wall
BulletExterior walls and perimetersLong-range views and a visible deterrentWall or pole arm
PTZParking lots, yards, large areasPan, tilt and zoom to follow activityPole, parapet or corner
Multi-sensorBuilding corners, large lotsSeveral views from one mountPole, corner or pendant
360° fisheyeOpen offices, sales floorsWhole-room coverage from one cameraCeiling
42U network rack in a West LA office IDF with 48-port Cat6A patch panels, horizontal wire managers and an OM4 fiber enclosure
IDF buildout: 42U rack on 19-inch EIA-310 rails, 48-port Cat6A patch panels with 1U horizontal managers, and an LC fiber enclosure fed by OM4 riser backbone.

Security Camera Installation for Commercial Facilities in LA

  • Offices
  • Warehouses
  • Schools
  • Medical Facilities
  • Retail
  • Industrial Facilities
  • Commercial Buildings

We install cameras in occupied buildings and new construction alike, and we take on a few cameras as readily as a full property. Work in customer areas is scheduled after hours so your business keeps operating. Typical camera installations around the city include:

Jewelry District retailers

High-detail cameras over display cases, registers and entrances, plus coverage of back rooms and safes.

Sylmar warehouses

Cameras along docks, aisles and fence lines, with PTZ cameras covering truck yards from the roofline.

Echo Park restaurants

Cameras on registers, entrances, kitchens and back doors, mounted discreetly to fit the dining room.

Hollywood office lobbies

Domes and turrets at lobby desks, elevators and garage entries, connected to the building’s recorder.

Security Camera Problems We Solve for IT Managers in Los Angeles

Footage you can’t use

Faces too small, glare or darkness ruin recordings. We choose the right camera and lens and re-aim for usable images.

Blind spots

Gaps between views leave incidents unrecorded. We map coverage and add or move cameras to close them.

Aging analog cameras

Low-resolution systems miss detail. We upgrade to IP cameras on modern cabling and connect them to your recorder.

Cameras that fail outdoors

Weather and sun wear out the wrong hardware. We install weather-rated cameras in sealed, properly mounted housings.

Our Security Camera Installation Process for Our Los Angeles Customers

  1. Site walk and coverage review

    We walk the property day and, when needed, at night, marking each view and noting lighting and mounting surfaces.

  2. Camera plan and quote

    You receive a camera schedule with type, location and view for each camera, plus an itemized scope.

  3. Cabling and mounts

    Camera cabling is installed and certified, and mounts, boxes and poles are set at each location.

  4. Camera installation

    Cameras are mounted, sealed where outdoors, and connected to PoE.

  5. Aiming and recorder connection

    Each camera is aimed and focused, then connected to your NVR or VMS and checked for recording.

  6. View check and handoff

    We review every view with you, adjust as needed, and deliver the camera schedule and as-built drawings.

Security Camera Installation Testing & Certification

Each camera is tested from cable to recording. We certify the camera’s cabling and confirm PoE, then check the live image for field of view, focus and detail, verify night performance where it matters, and confirm the camera is recording on your NVR or video management system.

Results are delivered as PDF files with a camera schedule and location map, which makes adding cameras and future troubleshooting simple.

Technician certifying a Cat6A permanent link at a patch panel and fusion splicing OS2 single-mode fiber in a rack-mount enclosure
Cat6A permanent links are certified to 500 MHz over a maximum of 90 m. Fiber splices are verified on OTDR against the TIA-568.3-D limit of 0.3 dB per splice.

Security Camera Installation Service Area in Southern California

Our office on West Olympic Boulevard puts our crews minutes from the Westside and a short drive to Hollywood, Downtown LA and the South Bay. We install security cameras throughout the city and these nearby cities:

Request a Security Camera Installation Quote

Send us the address, the areas you need covered, how many cameras you have in mind and what recorder you use, if any. Site photos help. We’ll schedule a site walk and follow up with a camera plan and itemized scope.

We hold a California C-7 state license issued by the Contractors State License Board in Sacramento (CSLB #[NUMBER]).

Los Angeles Telecom Techs
11340 W Olympic Blvd, Los Angeles, CA 90064
Tel: (562) 245-4723
Email: [email protected]

Get cameras that capture what matters, installed and tested.

Request a quote
Scroll to Top