Security Camera & Access Control Infrastructure for Los Angeles Businesses
Commercial security infrastructure built on three services: security camera cabling, security camera installation and access control wiring. We run and certify the cabling, mount and aim the cameras, and wire every reader, lock and door device back to your recorders and panels.
Adding cameras or securing more doors? Call (562) 245-4723 for a site walk and itemized quote.
Request a quoteSecurity Infrastructure Services
Cameras and access control are only as reliable as the cabling and installation behind them. Our technicians handle all three parts of the job themselves, so camera feeds stay up, doors lock when they should, and everything connects cleanly to your network and security systems.
Security Camera Cabling
IP Cameras • PoE • Cat6 / Cat6A • Outdoor Runs
Home-run PoE cabling from every camera location back to your NVR or network switch, sized for each camera’s power and bandwidth.
- Cat6 and Cat6A PoE runs to every camera
- Outdoor-rated cable for exterior cameras
- Fiber for parking lots and long runs
- Certified and labeled camera drops
Security Camera Installation
Mounting • Aiming • NVR Connection
Indoor and outdoor IP cameras mounted, aimed and connected, covering entrances, parking areas, docks, registers and hallways.
- Dome, bullet, PTZ and multi-sensor cameras
- Mounts, poles and weatherproof boxes
- Field-of-view aiming and focus
- Connection to your NVR or VMS
Access Control Wiring
Card Readers • Electric Locks • Door Contacts • REX
Cabling for card readers, door contacts, request-to-exit devices and electrified locks, wired back to your access control panels.
- Card reader and keypad wiring
- Electric strike and maglock wiring
- Door position and REX devices
- Panel terminations and labeling
Security Equipment & Cabling We Install in Los Angeles
- Dome Cameras
- Bullet Cameras
- PTZ Cameras
- Multi-Sensor Cameras
- Camera Mounts & Poles
- Weatherproof Junction Boxes
- PoE Switch Ports
- NVR Connections
- Outdoor-Rated Cable
- Fiber & Media Converters
- Card Readers
- Keypads
- Electric Strikes
- Maglocks
- Door Contacts & REX
- Access Control Panels
Today’s security cameras are IP devices powered over Ethernet, so each one needs a certified home run back to a PoE switch. Standard domes and bullets run on Cat6, while PTZ and multi-sensor cameras that draw more power get Cat6A. Cameras in parking lots, yards and outbuildings beyond copper’s 100 m limit are fed with fiber and media converters.
Access control brings its own cabling: composite cable to card readers, and multi-conductor runs to door contacts, request-to-exit devices and electric locks. We wire each door back to the access panel and coordinate lock behavior with fire and life-safety requirements, so doors secure properly and still release in an emergency.
| Device | Typical location | Cabling | Connects to |
|---|---|---|---|
| Indoor IP cameras | Domes in lobbies, halls, registers | Cat6 with PoE | PoE switch, NVR or VMS |
| Outdoor IP cameras | Bullets and domes on walls and eaves | Outdoor-rated Cat6 with PoE | PoE switch, NVR or VMS |
| PTZ and multi-sensor cameras | Parking lots, yards, large areas | Cat6A with high-power PoE | PoE switch, NVR or VMS |
| Long-distance cameras | Lots, gates and outbuildings | Fiber with media converters | Network switch in the nearest IDF |
| Card readers and keypads | Entry doors, suites, gates | Composite access control cable | Access control panel |
| Door hardware | Strikes, maglocks, contacts, REX | Multi-conductor low-voltage cable | Access panel and lock power supply |
Security Infrastructure for Commercial Facilities in LA
- Offices
- Warehouses
- Schools
- Medical Facilities
- Retail
- Industrial Facilities
- Commercial Buildings
We install security infrastructure in occupied buildings and new construction alike, and we take on a few cameras or a single door as readily as a full campus. Work that affects entry or coverage is scheduled after hours so your business keeps operating. Typical security jobs around the city include:
PoE cameras on every level and entry ramp, with card readers at pedestrian doors and gate controls.
Cameras on production lines, docks and perimeter fences, with fiber feeding cameras at the far end of the lot.
Cameras over registers, entrances and stockrooms, plus access control on back doors and offices.
Cameras at entrances and hallways, and card readers on exterior doors that lock down on a schedule.
Security Infrastructure Problems We Solve for IT Managers in Los Angeles
Bad cabling and maxed-out PoE budgets cause outages. We certify each run and right-size power for every camera.
Poor placement leaves key areas unrecorded. We plan coverage, add cameras and re-aim existing ones.
Wiring and lock power problems cause unreliable doors. We trace, repair and properly terminate every device.
Parking lots and outbuildings exceed copper limits. We extend fiber and install media converters.
Our Security Infrastructure Process for Our Los Angeles Customers
- Site walk and coverage review
We walk the property, mark camera views and controlled doors, and review your recorder and access system.
- Design and itemized quote
You receive camera and door schedules, cabling plans and an itemized scope with a schedule.
- Cabling rough-in
Installers pull PoE, fiber and access control cabling to every camera and door location.
- Camera and device installation
Cameras are mounted and aimed, and readers, contacts, REX devices and locks are installed and wired.
- Connection and integration
Cameras are connected to your NVR or VMS, and doors are terminated at the access panel, working with your security provider.
- Testing and handoff
Every camera view and door is tested, and you receive device schedules, as-built drawings and test results.
Security Infrastructure Testing & Certification
Every camera and reader cable is tested before devices go up. PoE camera runs are certified and power delivery is verified, fiber links are loss-tested, and each camera is checked for image, focus and recording. Every controlled door is tested for card access, locking, release and door position.
Reports are delivered as PDF files tied to your patch panel labels, which makes manufacturer warranty registration and future troubleshooting simple.
Security Infrastructure Service Area in Southern California
Our office on West Olympic Boulevard puts our crews minutes from the Westside and a short drive to Hollywood, Downtown LA and the South Bay. We install security infrastructure throughout the city and these nearby cities:
Request a Security Infrastructure Quote
Send us the address, the areas you need to cover with cameras and the doors you want to control. Site photos and floor plans help. We’ll schedule a site walk and follow up with an itemized scope.
We hold a California C-7 state license issued by the Contractors State License Board in Sacramento (CSLB #[NUMBER]).
Los Angeles Telecom Techs11340 W Olympic Blvd, Los Angeles, CA 90064
Tel: (562) 245-4723
Email: [email protected]
Get cameras and access control installed on reliable, certified cabling.
Request a quote