Security Camera Cabling in Los Angeles, CA for Reliable PoE Video Surveillance
Commercial security camera cabling for indoor, outdoor, parking lot and long-distance cameras. We run a certified PoE home run to every camera, protect exterior runs from weather and surges, use fiber where copper can’t reach, and connect everything cleanly to your switches and NVR.
Adding cameras or replacing old coax? Call (562) 245-4723 for a site walk and itemized quote.
Request a quoteSecurity Camera Cabling Services
Most camera outages trace back to the cable, not the camera. Our technicians install every camera run themselves, sized for the camera’s power and bandwidth and protected for where it’s mounted, following ANSI/TIA standards and the electrical code for indoor, outdoor and underground cabling.
Indoor Camera Cabling
Lobbies • Hallways • Registers • Plenum Cat6
Cat6 home runs to dome cameras in lobbies, hallways, offices and over registers, routed above ceilings and terminated at each camera location.
Outdoor & Exterior Camera Cabling
Outdoor-Rated • Conduit • Weatherproof Boxes
Outdoor-rated cable to cameras on walls, eaves and entrances, protected in conduit and sealed in weatherproof junction boxes.
PTZ & High-Power Camera Cabling
Cat6A • 802.3bt PoE • PTZ • Multi-Sensor
Cat6A for PTZ, heated and multi-sensor cameras that draw high-power PoE and stream more video.
Parking Lot & Pole Camera Cabling
Poles • Underground Conduit • Surge Protection
Cabling to pole-mounted cameras in parking lots and yards, run through underground conduit with surge protection at each pole.
Fiber for Long-Distance Cameras
Fiber • Media Converters • Beyond 100 m
Fiber and media converters for cameras beyond copper’s 100 m limit, such as far parking areas, gates and outbuildings.
Analog to IP Camera Cabling Upgrades
Coax Replacement • Cat6 • IP Cameras
Old coax and power cabling for analog cameras replaced with single Cat6 PoE runs for modern IP cameras.
Security Camera Cabling Components We Install in Los Angeles
- Cat6 Camera Runs
- Cat6A Camera Runs
- Plenum Cable
- Outdoor-Rated Cable
- Direct-Burial Cable
- Fiber Optic Cable
- Media Converters
- Conduit & Fittings
- Weatherproof Junction Boxes
- Camera Mount Back Boxes
- Surge Protectors
- RJ45 Field Plugs
- Patch Panels
- PoE Switch Patching
- NVR Connections
- Camera Labels
Every IP camera gets its own home run back to a PoE switch in the nearest telecom room, carrying both video and power on one cable. Standard fixed cameras run on Cat6, while PTZ, heated and multi-sensor cameras get Cat6A for their higher power draw. We check the switch’s PoE budget so every camera stays powered at night, when infrared illuminators draw the most.
Outdoor runs need more protection. We use outdoor-rated cable, run it in conduit, seal entries in weatherproof junction boxes and add drip loops so water never reaches the camera. Parking lot poles get underground conduit and grounded surge protection, and cameras beyond 100 m are fed with fiber and media converters.
| Camera location | Cable | Protection | Distance | Notes |
|---|---|---|---|---|
| Indoor ceilings and walls | Cat6 (plenum where required) | Above-ceiling supports | 100 m | Standard domes and fixed cameras |
| Exterior walls and eaves | Outdoor-rated Cat6 | Conduit, weatherproof box, drip loop | 100 m | Sealed entries keep water out of the camera |
| PTZ, heated or multi-sensor | Cat6A | Indoor or outdoor protection as above | 100 m | High-power PoE and higher video bandwidth |
| Parking lot poles | Outdoor or direct-burial Cat6 | Underground conduit, surge protection | 100 m | Grounded surge protection at the pole |
| Beyond 100 m | Fiber with media converters | Conduit, local power at the camera end | Well beyond copper limits | Far lots, gates and outbuildings |
Security Camera Cabling for Commercial Facilities in LA
- Offices
- Warehouses
- Schools
- Medical Facilities
- Retail
- Industrial Facilities
- Commercial Buildings
We cable cameras in occupied buildings and new construction alike, and we take on a handful of cameras as readily as a full campus. Work in customer areas is scheduled after hours so your business keeps operating. Typical camera cabling jobs around the city include:
Exterior cameras on buildings near the port, with outdoor-rated cable, sealed boxes and protection from salt air.
Pole cameras across vehicle lots, fed through underground conduit and fiber to cover the far rows.
Cameras in lobbies, elevators, garages and entrances, with plenum Cat6 above public ceilings.
Old analog coax replaced with Cat6 PoE runs to new IP cameras on docks, aisles and fences.
Security Camera Cabling Problems We Solve for IT Managers in Los Angeles
Infrared draws extra power after sunset. We fix weak runs and size PoE budgets so cameras stay on around the clock.
Poorly sealed entries let rain in. We re-terminate in weatherproof boxes with drip loops and sealed fittings.
Far lots and gates exceed the 100 m copper limit. We run fiber with media converters to cover them reliably.
Analog systems leave a mess of coax and power wire. We replace it with single, certified Cat6 PoE runs.
Our Security Camera Cabling Process for Our Los Angeles Customers
- Site walk and camera plan
We mark every camera location, measure run distances and check pathways, poles and telecom rooms.
- Cabling design and quote
You receive a camera schedule with cable type, protection and PoE needs for each location, plus an itemized scope.
- Pathways and conduit
Installers set supports, conduit, boxes and underground runs where exterior and pole cameras need them.
- Cable pulling and termination
Each camera run is pulled, terminated at the camera location and landed on patch panels in the telecom room.
- Certification and PoE check
Every run is certified, fiber links are loss-tested, and PoE delivery is verified at each location.
- Labeling and handoff
Runs are labeled by camera, and you receive a camera schedule, as-built drawings and test reports.
Security Camera Cabling Testing & Certification
Cameras run all day and night, so their cabling has to be solid. We certify every Cat6 and Cat6A camera run, including resistance balance for reliable PoE, loss-test every fiber link, and confirm power and connectivity at each camera location before the cameras are installed.
Reports are delivered as PDF files tied to your patch panel labels, which makes manufacturer warranty registration and future troubleshooting simple.
Security Camera Cabling Service Area in Southern California
Our office on West Olympic Boulevard puts our crews minutes from the Westside and a short drive to Hollywood, Downtown LA and the South Bay. We install security camera cabling throughout the city and these nearby cities:
Request a Security Camera Cabling Quote
Send us the address, the number of cameras, which are indoor, outdoor or on poles, and where your NVR or switches are. Site photos and floor plans help. We’ll schedule a site walk and follow up with an itemized scope.
We hold a California C-7 state license issued by the Contractors State License Board in Sacramento (CSLB #[NUMBER]).
Los Angeles Telecom Techs11340 W Olympic Blvd, Los Angeles, CA 90064
Tel: (562) 245-4723
Email: [email protected]
Get every camera on certified, protected cabling.
Request a quote