Network Cabling Installation Los Angeles CA | New Drops, TI & Cat6A Upgrades

Network Cabling Installation Los Angeles CA – Commercial and Industrial

Commercial network cabling installation for new offices, tenant improvements, relocations and upgrades. We plan the drop layout, pull and terminate every Cat6 and Cat6A run, build out the rack, and certify each link before handoff.

Need cabling installed before a move-in date? Call (562) 245-4723 for a site walk and itemized quote.

Request a quote

Network Cabling Installation Services

Installation is where cabling succeeds or fails. Our technicians install every run themselves, from the first J-hook to the last patch panel port, following ANSI/TIA-568 and TIA-569 practices so the network performs on day one and for years after.

New Office Network Cabling Installation

New Construction • Drop Layout • Pathways • IDF

Complete network cabling installed in new suites and ground-up buildings, coordinated with your general contractor so pathways go in before ceilings close.

Tenant Improvement Installation

Demo • Re-Use • New Drops • IDF Updates

Abandoned cable removed, usable runs tested and kept, and new drops installed to match the revised floor plan during TI buildouts.

Moves, Adds & Changes

Single Drops • Desk Moves • Re-Patching • Same-Week Service

Small installs handled as readily as large ones: a few new drops, a relocated desk or a new printer connected and certified.

Cat6 & Cat6A Upgrade Installation

Cat5e Replacement • Multi-Gig • PoE++ • Access Points

Older Cat5e replaced with Cat6 or Cat6A where new access points, cameras and multi-gig switches need more bandwidth and power.

Patch Panel & Rack Installation

Racks • Patch Panels • Cable Managers • Grounding

Racks anchored and braced, patch panels and horizontal managers mounted, and every installed run dressed and terminated in order.

Office Relocation Installation

Pre-Move Install • Move Day • Decommission

Network cabling installed and tested at the new space before move day, with the old space decommissioned and cleared afterward.

Network Cabling Components We Install in Los Angeles

  • Cat6 Cable
  • Cat6A Cable
  • Plenum & Riser Jackets
  • Keystone Jacks
  • Wall Plates
  • Floor Boxes
  • Patch Panels
  • Network Racks
  • Horizontal Managers
  • Vertical Managers
  • J-Hooks
  • Cable Tray
  • Sleeves & Firestopping
  • Surface Raceway
  • Patch Cords
  • Port Labels

A clean installation starts above the ceiling. We hang J-hooks or tray on a regular spacing, keep bundles loose with hook-and-loop ties instead of zip ties, and route around fluorescent fixtures, motors and power feeds. Wall penetrations get sleeves and rated firestopping, and every run is pulled within the cable’s tension and bend radius limits.

At the outlet, jacks are terminated with pair twists kept to the termination point. In the telecom room, runs are dressed through managers to patch panels in port order, with a service loop left so future moves don’t require a new pull.

Installation practiceWhat we doWhy it mattersReference
Horizontal run lengthKeep permanent links at or under 90 mLonger runs fail certification and drop speedTIA-568.2-D
Bend radiusAt least 4× cable diameter for 4-pair UTPTight bends degrade return loss and NEXTTIA-568.2-D
Pulling tensionNo more than 25 lbf on 4-pair cableOver-pulling stretches pairs and damages performanceTIA-568.2-D
Pair untwistNo more than 0.5 in at terminationExcess untwist adds crosstalkTIA-568.2-D
Support and pathwaysJ-hooks or tray, no resting on ceiling gridPrevents sag, crushing and code violationsTIA-569 / NEC
Abandoned cableRemove accessible abandoned cable during TI workReduces fire load and keeps ceilings clearNEC Article 800
LabelingMatching labels at outlet and patch panelFast troubleshooting and clean recordsTIA-606
42U network rack in a West LA office IDF with 48-port Cat6A patch panels, horizontal wire managers and an OM4 fiber enclosure
IDF buildout: 42U rack on 19-inch EIA-310 rails, 48-port Cat6A patch panels with 1U horizontal managers, and an LC fiber enclosure fed by OM4 riser backbone.

Network Cabling Installation for Commercial Facilities in LA

  • Offices
  • Warehouses
  • Schools
  • Medical Facilities
  • Retail
  • Industrial Facilities
  • Commercial Buildings

We install in occupied buildings and new construction alike, and we take on a handful of drops as readily as a full-floor buildout. Noisy work is scheduled after hours so your business keeps operating. Typical installations around the city include:

Downtown LA high-rise move-ins

Full-floor installs on Wilshire and Grand, timed with the general contractor so drops, IDF and certification are done before furniture arrives.

Arts District creative lofts

Exposed-ceiling spaces where cable tray and neat routing are part of the look, with drops to benches, studios and ceiling access points.

Westwood medical offices

Exam room and workstation drops installed in phases around patient hours, with every run labeled for the clinic’s IT provider.

San Fernando Valley warehouses

New drops to packing stations, label printers and dock cameras, with remote IDFs placed so no run exceeds the copper distance limit.

Network Cabling Installation Problems We Solve for IT Managers in Los Angeles

Move-in dates at risk

We schedule around the construction sequence and crew up when needed, so cabling is certified before your team arrives.

Ceilings full of abandoned cable

During TI work we remove accessible dead runs and keep only links that test good, leaving a clean, code-compliant ceiling.

Hard-lid ceilings and concrete walls

Where ceilings can’t be opened, we use surface raceway, floor boxes and core-drilled sleeves to reach every location neatly.

Messy installs from past contractors

We re-dress racks, re-terminate failing jacks and re-label everything so your installation finally matches the documentation.

Our Network Cabling Installation Process for Our Los Angeles Customers

  1. Site walk and plan review

    We review floor plans, mark every drop, and check ceiling type, pathways, firewalls and telecom room space.

  2. Installation scope and schedule

    You receive an itemized scope with drop counts, cable category, jacket rating and rack layout, plus a schedule tied to your move-in or construction dates.

  3. Rough-in

    Installers set J-hooks, tray, sleeves and firestopping, then pull each run from the outlet location to the telecom room.

  4. Trim-out and termination

    Jacks and wall plates are installed at outlets, and runs are dressed and terminated to patch panels in port order.

  5. Certification

    Every permanent link is certified and any failing run is corrected before we close out.

  6. Labeling, cleanup and handoff

    Outlets and ports are labeled, the site is cleaned, and you receive as-built drawings and the certification report.

Network Cabling Installation Testing & Certification

An installation isn’t finished until it’s tested. We certify every Cat6 and Cat6A permanent link for wire map, length, insertion loss, NEXT, return loss and related parameters, so problems from pulling, bending or termination are caught while we’re still on site.

Reports are delivered as PDF files tied to your patch panel labels, which makes manufacturer warranty registration and future troubleshooting simple.

Technician certifying a Cat6A permanent link at a patch panel and fusion splicing OS2 single-mode fiber in a rack-mount enclosure
Cat6A permanent links are certified to 500 MHz over a maximum of 90 m. Fiber splices are verified on OTDR against the TIA-568.3-D limit of 0.3 dB per splice.

Network Cabling Installation Service Area in Southern California

Our office on West Olympic Boulevard puts our crews minutes from the Westside and a short drive to Hollywood, Downtown LA and the South Bay. We install network cabling throughout the city and these nearby cities:

Request a Network Cabling Installation Quote

Send us the address, approximate square footage, the number of drops you need and your target completion date. Floor plans help. We’ll schedule a site walk and follow up with an itemized scope.

We hold a California C-7 state license issued by the Contractors State License Board in Sacramento (CSLB #[NUMBER]).

Los Angeles Telecom Techs
11340 W Olympic Blvd, Los Angeles, CA 90064
Tel: (562) 245-4723
Email: [email protected]

Get your network cabling installed, tested and certified on schedule.

Request a quote
Scroll to Top